|
|
|
|
|
|
|
FAQ: How to Setup Virus Scanning with Trend Micro (Server)
Any version of Trend Micro that has a Real-Time Scan feature is
compatible with eXchange POP3.
General Instructions
The following steps are general for configuring any virus scanner to work with eXchange POP3.
If a particular step is not possible on your virus scanner, skip the step.
Step 1
Within your virus scanner, turn on automatic scanning of inbound files (ie. files written to hard drive).
Step 2
Within your virus scanner, any option selected on how to handle infected files should operate automatically without user intervention (no pop-up
messages or dialogs should occur).
Step 3
You scanner should only scan the SCAN subfolder of the eXchange POP3 installation. The other folders and most
importantly the DATA subfolder and all the folders under it should NOT be scanned.
Step 4
Enable virus scanning in eXchange POP3.
While running eXchange POP3 Administration program select:
eXchange POP3  Configuration Virus Scanning
and enable virus scanning. See eXchange POP3 Help for information on virus scanning options.
Example using Trend Micro Server
Open the Trend Micro ServerProtect Management Console.
Select Set Scan Option.
Ensure Enable real-time scanning is selected.
Under Scan Direction, ensure Incoming or Incoming & Outgoing is selected.
Click Set Action button.
Set options as shown above.
Click Apply.
Click Apply again.
Select Exclusion List.
Click the Add button and add the MDB folder and all its subfolders under the eXchange POP3 installation folder.
(eg. C:\Program Files\eXchange POP3\MDB )
|
|
|
|
|
| © 2003 Kinesphere Corporation. All rights reserved. |
|
